Troubleshooting authentication
Formatting non-EAPOL RADIUS password attribute
About this task
Make the required changes on the RADIUS server to the password format.
• RADIUS server is to use the format changed to IpAddr.MACAddr.PortNumber.
Displaying the EAPOL multihost interface
About this task
Display the EAPOL Multihost information for review.
Procedure
1. Enter the show eapol multihost interface <port#> command to display
2. Review the information to verify that Use RADIUS To Authenticate Non EAP MAC
Enabling RADIUS to authorize Non-EAP MACs
About this task
Make the required changes on the RADIUS server to authenticate Non-EAP clients.
Use the RADIUS server vendor documentation to help you apply changes to the RADIUS
server.
RADIUS server configuration error
The correct MAC address and password for the switch must be configured on the RADIUS
server.
Task flow: RADIUS server configuration error
The following task flow assists you to configure the RADIUS server with the correct MAC and
password.
102
Troubleshooting
the information.
is enabled.
Comments? infodev@avaya.com
December 2013