Led State Definitions; Switch Leds - Avaya VSP 7200 Series Installing Manual

5 up
6 up
Check the internal temperature of the switch.
Note:
The output of this command is different between the VSP 7254XSQ and the VSP 7254XTQ. An
example of both is shown below.
VSP-7254XSQ:1>show sys-info temperature
Temperature Info :
CPU Temperature
25
VSP-7254XTQ:1>show sys-info temperature
Temperature Info :
CPU Temperature
28

LED state definitions

The figures and tables in the following sections describe the LEDs on the Avaya Virtual Services
Platform 7200 switch. The tables describe LED operation for a switch that finishes the power-on
self-test.
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a light
source.

Switch LEDs

The following table describes the main switch LED state indications provided by LED color and
fluctuation cues.
Important:
In addition to the fan modules, each power supply also has a fan. The power supply stops
working if a power supply fan fails, but there is no LED or software warning that indicates this
failure. Try to recover the power supply fan by resetting the switch. If the fan does not recover,
then replace the faulty power supply.
Table 11: Switch LED state indicators
Label Color and Status
PWR Off
November 2016
regularSpeed
regularSpeed
MAC Temperature MAC2 Temperature
34
MAC Temperature PHY1 Temperature
38
Description
The switch is not receiving power and not operating.
Installing the Avaya VSP 7200 Series
Comments on this document? infodev@avaya.com
front-back
front-back
29
PHY2 Temperature
32 30
LED state definitions
Table continues...
35