Table of Contents
Advertisement
System Status Commands
System status commands allow you to show and set P130 Switch system definition,
image version and module/ interface information.
Show system Command
Use the show system command to display the uptime, system name, location, and
contact person.
The syntax for this command is:
show system
Example:
P130-N> show system
Uptime d,h:m:s
------------------------
0,2:40:55
System Name
-----------
P130T_version_2.0.3
Switch MAC address
------------------
00 40 0d 8a 04 b4
Set system location Command
Use the set system location command to set the mib2 system location MIB
variable. A string of 2 words or more must be type inside inverted commas - e.g.
'Operations Floor'
The syntax for this command is:
set system location [string]
string
Avaya P130 User's Guide
System Location
---------------
Alpha LAB
Location string. The location is cleared if this field is blank.
Chapter 6
Avaya P130 CLI
System Contact
--------------
Jack
47
Advertisement
Table of Contents
