Chapter 6
Avaya P130 CLI
Erase startup-config Command
Use the erase startup-config command to erase the NV-RAM.
The syntax for this command is:
erase startup-config
Example:
P130-1# erase startup-config
Show erase status Command
Use the show erase status command to show the status of the current erase
startup-config operation.
The syntax for this command is:
show erase status
Example:
P130-N> show erase status
Module
Source file
Destination file : startup-config
Host
Running state
Failure display
Last warning
64
: 1
: startup-config
: 0.0.0.0
: Idle
: (null)
: No-warning
Avaya P130 User's Guide