Show Ppp Incoming Baud-Rate Command; Show Ppp Configuration; Show Tftp Download/Upload Status Command - Avaya P333T User Manual

Show ppp incoming baud-rate Command

Use the show ppp incoming baud-rate command to display the set baud-rate
The syntax for this command is:
show ppp incoming baud-rate
Example:
Cajun_P330-N> show ppp baud-rate
PPP baud rate is 38400

Show ppp configuration

Use the show ppp configuration command to display the ppp configuration
The syntax for this command is:
show ppp configuration
Example:
Cajun_P330-N> show ppp configuration
PPP baud rate is 38400
PPP incoming timeout is 0 minutes
PPP Authentication Parameters:
------------------------------
Incoming:

Show tftp download/upload status Command

Use the show tftp download status and show tftp upload status
commands to display the status of the current TFTP configuration file copy process
into/from the device.
The syntax for this command is:
show tftp {download|upload} status [<mod_num>]
Example:
Cajun_P330-N> show tftp upload status 1
Module
Source file
Destination file : c:\conf.cfg
Host
Running state
Failure display
Avaya P333T User's Guide
None
: 1
: stack-config
: 149.49.36.200
: Executing
: (null)
Chapter 6 Cajun Campus CLI – Layer 2
65