Set Timezone Command; Clear Timezone Command; Set Time Protocol Command; Set Time Client Command - Avaya P130 User Manual

Set timezone Command

Use the set timezone command to assign a timezone name and set the time
difference of your P130 relative to the Coordinated Universal Time (UTC / GMT).
The minutes parameter can only be set to 30.
The syntax for this command is:
set timezone <zone name> <hours|hours:min>
Example:
P130-1# set timezone GMT -3:30
Timezone set to 'GMT', offset from UTC is -3:30 hours

Clear timezone Command

Use the clear timezone command to return the timezone to its default,
Coordinated Universal Time (UTC).
The syntax for this command is:
clear timezone
Example:
P130-1# clear timezone
Timezone name and offset cleared.

Set time protocol Command

Use the set time protocol command to set the protocol for use in the system as
either SNTP protocol or time protocol.
The syntax for this command is:
set time protocol
Example:
P130-1# set time protocol sntp-protocol
The protocol has been set to SNTP protocol
P130-1#
The protocol has been set to TIME protocol

Set time client Command

Use the set time client command to enable or disable the Time Client mode.
Avaya P130 User's Guide
[sntp-protocol|time-protocol]
set time protocol time-protocol
Chapter 6 Avaya P130 CLI
45