Enabling The Simple Network Time Protocol - Avaya P580 User Manual

Enabling the Simple Network Time Protocol

Web Agent
Procedure
Document No. 650-100-700, Issue 1
You can enable Simple Network Time Protocol (SNTP) on your switch
using either the Web Agent or the CLI. Enabling SNTP automatically
synchronizes time on all computers, switches, and other devices connected
to your switch.
When you enable SNTP, you are required to set your time zone and the rule
or dates of Summer Time Hours for your location. For information about
setting one-time summer hours, see
Hours" later in this chapter. For information about setting Summer Time
Hours, see "Setting Summer Time
To enable SNTP on your switch using the Web Agent:
1. Select System Clock from the System > Configuration group on the Web
Agent window. The System Clock dialog box opens
Figure 3-2. System Clock Dialog Box.
2. Select Simple Network Time Protocol (SNTP) from the Clock Options
box. The SNTP Client Configuration window opens
Configuring System Information
"Setting One-Time Summer Time
Hours" later in this chapter.
(Figure
(Figure
3-2):
3-3).
3-3