Management Cable And Transceiver Specifications And Pinouts; T4000 Routing Engine Interface Cable Specifications; Table 70: Cable Specifications For Routing Engine Management - Juniper T4000 Hardware Manual

CHAPTER 13
Management Cable and Transceiver
Specifications and Pinouts

T4000 Routing Engine Interface Cable Specifications

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
T4000 Routing Engine Interface Cable Specifications on page 113
T4000 Alarm Relay Contact Wire Specifications on page 114
DB-9 Connector Pinouts for the Routing Engine AUXILIARY and CONSOLE
Ports on page 114
RJ-45 Connector Pinouts for the T4000 Management ETHERNET Port on page 115
Table 70 on page 113 lists the specifications for the cables that connect to the
management ports on the connector interface panel (CIP).

Table 70: Cable Specifications for Routing Engine Management

Port Cable Specification
Routing Engine RS-232 (EIA-232)
console or serial cable
auxiliary
interface
Routing Engine Category 5 cable or
Ethernet equivalent suitable
interface for 100Base-T
operation
T4000 Connector Interface Panel (CIP) Description on page 14
Connecting the T4000 Router to a Management Ethernet Device on page 180
Connecting the T4000 Router to a Management Console or Auxiliary Device on page 178
DB-9 Connector Pinouts for the Routing Engine AUXILIARY and CONSOLE Ports on
page 114
RJ-45 Connector Pinouts for the T4000 Management ETHERNET Port on page 115
Maximum
Cable/Wire Supplied Length
One 6-ft (1.83-m) 6 ft (1.83 m)
length with
DB-9/DB-9
connectors
One 15-ft (4.57-m) 328 ft
length with (100 m)
RJ-45/RJ-45
connectors
Router
Receptacle
DB-9 male
RJ-45
autosensing
113