Management Cable And Transceiver Specifications And Pinouts; Routing Engine Interface Cable And Wire Specifications For The M7I Router; Table 52: Cable Specifications For Routing Engine Management Ports - Juniper M7i Hardware Manual

CHAPTER 13
Management Cable and Transceiver
Specifications and Pinouts

Routing Engine Interface Cable and Wire Specifications for the M7i Router

Table 52: Cable Specifications for Routing Engine Management Ports

Port
Routing Engine
console or
auxiliary
interface
Routing Engine
Ethernet
interface
Related
Documentation
Copyright © 2019, Juniper Networks, Inc.
Routing Engine Interface Cable and Wire Specifications for the M7i Router on page 97
RJ-45 Connector Pinouts for the M7i Routing Engine MGMT Port on page 98
DB-9 Connector Pinouts for the M7i Routing Engine AUX/MODEM and CONSOLE
Ports on page 98
For management and service operations, you connect the Routing Engine to an external
console or management network. (For more information, see
Description" on page 17.)
Table 52 on page 97 lists the specifications for the cables that connect to management
ports.
Cable Cable/Wire
Specification Supplied
RS-232 One 6-ft
(EIA-232) serial (1.83-m) length
with DB-9/DB-9
connectors
Category 5 cable One 15-ft
or equivalent (4.92-m) length
suitable for with
100Base-T RJ-45/RJ-45
operation connectors
Replacing the Routing Engine Interface Port Cables on page 144
Maintaining the M7i Routing Engine on page 192
Replacing the M7i Routing Engine on page 141
"M7i Routing Engine
Maximum Router
Length Receptacle
6 ft (1.83 m) DB-9 male
328 ft (100 m) RJ-45
autosensing
97