ACX7100-32C Management and Console Port
Specifications and Pinouts
IN THIS SECTION
Management Cable Specifications for ACX7100 Routers | 55
Management Port Connector Pinout Information for ACX7100 | 55
Console Port Connector Pinout on ACX7100 Routers | 56
USB Port Specifications for ACX7100 | 57
Management Cable Specifications for ACX7100 Routers
Table 26 on page 55
lists the specifications for the cables that connect the console and management
ports to management devices.
Table 26: Specifications of Cables to Connect to Management Devices
Ports
RJ-45 Console (CON) port
Management (MGMT)
port
Management Port Connector Pinout Information for ACX7100
The management port—labeled MGMT—on an ACX7100 uses an RJ-45 connector to connect to a
management device for out-of-band management.
Cable Specifications
Receptacle
RS-232 (EIA-232) serial
RJ-45
cable
Ethernet cable with an
RJ-45
RJ-45 connector
Additional Information
Connect a Device to a
Management Console by
Using an RJ-45 Connector
Connect a Device to a
Network for Out-of-Band
Management
55