CHAPTER 13
Alarm and Management Cable
Specifications and Pinouts
PTX5000 Alarm Relay Contact Wire Specifications
Related
Documentation
PTX5000 Management Interface Cable Specifications
Copyright © 2017, Juniper Networks, Inc.
PTX5000 Alarm Relay Contact Wire Specifications on page 149
PTX5000 Management Interface Cable Specifications on page 149
RJ-45 Connector Pinouts for the PTX5000 Auxiliary and Console Ports on page 150
RJ-45 Connector Pinouts for the PTX5000 Management HOST/ETHERNET
Port on page 151
For management and service operations, you can connect the packet transport router
to external alarm-reporting devices through the alarm relay contacts on the craft interface.
You must provide a wire with gauge between 28-AWG and 14-AWG (0.08 and 2.08
2
mm
).
PTX5000 Craft Interface Description on page 16
Connecting the PTX5000 Packet Transport Router to an External Alarm-Reporting
Device on page 190
Table 70 on page 149
lists the specifications for the cables that connect to the
management ports on the Control Board.
Table 70: Cable Specifications for Routing Engine Management
Port
Cable Specification
Routing Engine
RS-232 (EIA-232)
console or
serial cable
auxiliary interface
Maximum
Cable Supplied
Length
One 6-ft (1.83-m)
6 ft (1.83 m)
length with RJ-45
connectors
Packet
Transport
Router
Receptacle
RJ-45
149