Table of Contents
Advertisement
Installation Guide
Connecting the Test Fixture with a Measuring Instrument
Connecting the Test Fixture with a Measuring Instrument
Connecting the test fixture 16197A with a measuring instrument requires an adapter suited
to the instrument.
The test fixture 16197A is suitable for use with a high-frequency LCR meter or an
impedance analyzer. Table 1-1 shows possible adapter combinations.
Table 1-2
Measuring instrument
4287A
4291A/B
4286A
4395A
4396B
E4991A
The test fixture 16197A can also be connected with any measuring instrument with
4-terminal pair configuration if an appropriate adapter is used.
Table 1-3
Measuring instrument
4294A
4194A
4192A, 4194A,
4263B, 4268A,
4278A, 4279A,
4284A, 4285A,4288A
For the procedure for attaching an adapter, see the Operation Manual for the adapter.
NOTE
Calibration on the 7-mm connector surface may be necessary depending on the type of
measuring instrument. In such a case, perform calibration on the 7-mm connector surface
before connecting the test fixture with the measuring instrument. For details, see the
Operation Manual for the measuring instrument.
18
Adapter for a Measuring Instrument with a 7-mm
Connector
Adapter
Test head + Test fixture stand (supplied with the 4287A)
Test station + Test head (supplied with the 4291A/B)
Test head + Test fixture stand (supplied with the 4286A)
43961A impedance test adapter
*1
*1
43961A impedance test adapter
Test head (supplied with the E4991A)
*1. The measuring instrument requires the "Option 010 impedance measurement function".
Adapter for a Measuring Instrument with 4-terminal
Pair Configuration
Adapter
42942A terminal adapter
41941A+ 16099A or 41941B+ 16099A
16085B terminal adapter
Chapter 1
Advertisement
Table of Contents
