Hcopy Subsystem; Hcopy Subsystem Command Reference; System Subsystem; System Subsystem Command Reference - Agilent Technologies N9360A Programming Manual

5
Programming Command Reference

HCOPy Subsystem

HCOPy Subsystem Command Reference

SYSTem Subsystem

SYSTem Subsystem Command Reference

5-76
The HCOPy commands are used to control the printing function.
Print Screen Image
HCOPy:SDUMp
This command executes to print a screen image.
The SYSTem commands are used to control the overall system
function.
System Error
SYSTem:ERRor?
This query command returns a set of values <int 1> and
<string 2>, for error numbers and error messages. Refer to
Table 4-6 for the listings of the error messages.
Lock System Panel
SYSTem:KLOCk ON|OFF|1|0
SYSTem:KLOCk?
This command locks the control panel functions for protection.
At preset, this is set to
If this is set to (1), all of the function become inactive, but
ON
only the Local softkey is defined. When the Local softkey is
pressed or the command SYSTem:KLOCk OFF is sent, the
Tester returns to the normal operation.
This command is not identical to the panel key lock on the
[Configuration] screen. See
N9360A Multi UE Tester W-CDMA Programming Manual
(0).
OFF
Panel Key Control on page 15.