Upgrading the LSPs
For more information on LSP upgrades, see one of the following chapters in Installation and
Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server, 555-234-100:
Chapter 11: "Upgrade of an existing S8300A to R3.1 with manual upgrade of G700
●
firmware"
Chapter 12: "Upgrade of an existing S8300B to R3.1 with manual upgrade of G700
●
firmware"
Upgrading firmware on media gateways and media modules
You can use the Upgrade Tool to upgrade the firmware on all the media gateways and media
modules. However, to use the tool, the firmware files must be installed on the S8300 or other
TFTP server that is accessible to the media gateways.
For more information on the firmware upgrade process, see Installing and Upgrading the Avaya
G700 Media Gateway and Avaya S8300 Media Server (555-234-100).
Upgrade tasks
Preupgrade tasks:
Stopping call processing on the LSPs or ESSs if being used (main server only)
●
page 151
Connecting to the active media server
●
Current configuration tasks:
Starting a SAT session
●
Checking link status with SAT (main server only)
●
Recording all busyouts
●
Checking synchronization with the SAT (main server only)
●
Disabling scheduled maintenance with the SAT (main server only)
●
Busying out MMI circuit packs with SAT for a duplicated control network only (main server
●
only)
on page 154
on page 151
on page 152
on page 153
on page 152
on page 153
on page 153
Issue 2.1 June 2006
Upgrade tasks
on
147