Enabling Scheduled Maintenance With Sat; Busying Out Previously Busied Out Trunks; Checking For Translation Corruption; Resolving Alarms - Avaya S8100 Series Manual

Upgrading Communication Manager on Avaya S8500 Media Server from R2.x/R3.0 to R3.1 or from R3.1 to

Enabling scheduled maintenance with SAT

To enable scheduled maintenance.
1. Type change system-parameters maintenance and press Enter.
2. Ensure that the administration for the Start Time and Stop Time fields is the same as
before the upgrade.

Busying out previously busied out trunks

If you recorded any busyouts earlier on the main server only, you need to ensure that they also
are busied out after the conversion.

Checking for translation corruption

To check for translation corruption:
1. Type newterm. Press Enter.
2. If you see the following message:
Warning: Translation corruption detected . . .
then follow the normal escalation procedure for translation corruption before continuing the
upgrade.

Resolving alarms

To clear alarms:
1. Under Alarms, click Current Alarms to examine the alarm log.
2. Select the server alarms that you want to clear and click Clear, or click Clear All.
3. Resolve or clear Communication Manager alarms with SAT commands and the
Maintenance Commands Reference and Alarms Maintenance books.
140 Upgrading, Migrating, and Converting Media Servers and Gateways