Adding An Ncc - Siemens Scalance XC206-2SFP-MM Installation Instructions Manual

9.2.1

Adding An NCC

To add an NCC node, complete the following steps (refer to Figure 35):
Click Add.
•
Next, type in the Node number to match the Node number from the Zeus configuration (1-
•
64).
Add a Node Name.
•
Choose NCC-G as the Node Type.
•
Choose the Type of NCC-G Node as either This Unit or Remote Unit.
•
Type the TCP/IP Network Address as the IP address of the NCC PC.
•
Click Save.
•
Figure 9–6: Adding An NCC Node
Siemens Industry, Inc.
Smart Infrastructure
41 A6V12198161_en--_a