:POWer:INRush:APPLy
Command Syntax
:POWer:INRush:APPLy
The :POWer:INRush:APPLy command applies the inrush current analysis.
The Inrush current analysis measures the peak inrush current of the
power supply when the power supply is first turned on.
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
":MEASure:PCURrent"
":POWer:INRush:EXIT"
":POWer:INRush:NEXT"
on page 483
on page 548
on page 549
24
:POWer Commands
547