Applying Layer 2 Port Mirroring To Traffic Forwarded Or Flooded To A Vlan - Juniper EX9200 Features Manual

Port Mirroring Feature Guide for EX9200 Switches

Applying Layer 2 Port Mirroring to Traffic Forwarded or Flooded to a VLAN

52
You can apply a Layer 2 port-mirroring firewall filter to traffic being forwarded or flooded
to a VLAN. Only packets of the specified family type and forwarded or flooded to that
VLAN are mirrored.
Before you begin, complete the following task:
Define a Layer 2 port-mirroring firewall filter to be applied to the traffic being forwarded
to a VLAN or flooded to a VLAN. For details, see Defining a Layer 2 Port-Mirroring Firewall
Filter.
NOTE: This configuration task shows two Layer_2 port-mirroring firewall
filters: one filter applied to the VLAN forwarding table ingress traffic, and
one filter applied to the VLAN flood table ingress traffic.
To apply a Layer 2 port-mirroring firewall filter to the forwarding table or flood table of
a VLAN:
Enable configuration of the VLAN
1.
Layer 2 port-mirroring firewall filter for forwarded or flooded traffic:
For a VLAN:
[edit]
user@host# edit bridge-domains bridge-domain-name
For a VLAN under a routing instance:
[edit]
user@host# edit routing-instances routing-instance-name bridge-domains
bridge-domain-name
user@host# set instance-type virtual-switch
For more detailed configuration information, see Configuring a VPLS Routing Instance.
Configure the VLAN:
2.
[edit]
user@host# set domain-type bridge
user@host# set interface interface-name
user@host# set routing-interface routing-interface-name
For more detailed configuration information, see Configuring a Bridge Domain and
Configuring VLAN Identifiers for Bridge Domains and VPLS Routing Instances.
Enable configuration of traffic forwarding on the VLAN:
3.
[edit ... bridge-domains bridge-domain-name]
user@host# edit forwarding-options
to which you want to apply a
bridge-domain-name
Copyright © 2016, Juniper Networks, Inc.