Configuring The Zxr10 Zsr V2 As An Ftp Client; Figure 1-7 Ftp Server Configuration Example - Zte ZXR10 ZSR V2 Configuration Manual (System Management

ZXR10 ZSR V2 Configuration Guide (System Management)

Figure 1-7 FTP Server Configuration Example

l
Configuration Flow
1. Enable the FTP server function and listening port 21 of the ZXR10 ZSR V2.
2. Set the FTP server root directory to /datadisk0/LOG/.
3. Set both the FTP server user name and password to zte.
4. Upload and download files through the FTP server to verify the FTP server
function.
l
Configuration Commands
The configuration flow on the ZXR10 ZSR V2 is shown below. For how to configure
an FTP server user name and password, refer to "Chapter 4 User Management".
R1#configure terminal
Enter configuration commands, one per line.End with CTRL/Z.
R1(config)#ftp-server enable
R1(config)#ftp-server top-directory /datadisk0/LOG/

1.5.2 Configuring the ZXR10 ZSR V2 as an FTP Client

This procedure describes how to configure the ZXR10 ZSR V2 as an FTP client.
Prerequisite
The ZXR10 ZSR V2 can access the FTP server network.
Steps
1. Configure and start an FTP server.
The following takes the WFTPD FTP server software as an example to describe how
to configure an FTP server.
a. Run wftpd32.exe. The WFTPD window is displayed, see
SJ-20140504150128-007|2014-05-10 (R1.0)
1-12
ZTE Proprietary and Confidential
Figure 1-8.