App2Me Updating Procedure - Ricoh D104 Field Service Manual

7. "Press any key to continue..." is appeared, then press "Enter" key again. The updating to the SD card
starts.
8. "Press any key to continue..." is appeared again, then press "Enter" key. The command prompt screen
is disappeared automatically if the updating is successful.
9. Remove the Java VM card from the SD card writer after going off the access lamp on the SD card
writer.
10. Insert the Java VM card in the SD slot 2 of the machine and turn the main power on.

App2Me Updating Procedure

Follow this procedure to update App2Me if a new version is available.
1. Push the [User/Tools] key on the operation panel.
2. If an administrator setting is registered for the machine, Step 3 and Step 4 are required. Otherwise,
skip to step 5.
3. Push [Login/Logout] on the operation panel.
4. Login with the administrator user name and password.
5. Touch "Extended Feature Settings" twice on the LCD.
6. Touch each of the applications until the status changes to "Stop".
7. Turn the machine off.
8. Remove the SD slot cover (
9. Prepare the newer App2Me file from the Firmware Download Center, and then unzip the zip file.
(The folder name is "337051920".)
x 1), and then remove the Java VM card from SD slot 2.
Firmware Update
5
537