2. Installation
Installation Procedure
2
1. Remove the screw [A] on the scanner right cover.
2. Attach the tray bracket [B] to the scanner right cover (
• For this model, use the screw holes marked "3" on the table bracket.
3. Attach the lower tray [A] to the tray bracket (
4. Attach the upper tray [B] to the tray bracket (
5. Use the clamps as necessary to clamp the cable of the card read/writer device.
104
[C] x 2: M3x10,
x 2: M3x8).
x 1: M3x8).
[D] x 1: M3x25).