Ricoh D104 Field Service Manual page 432

5. System Maintenance
001 All Clear
002 Engine [ENG]
003 SCS
004 IMH Memory Clr
005 MCS
006 Copier application
5
007 Fax application
008 Printer application
009 Scanner application
010 Web Service
011 NCS
012 R-FAX
014 Clear DCS Setting
430
Resets all correction data for process control and all
software counters, and returns all modes and adjustments to
their default values.
Clears the engine settings.
Initializes default system settings, SCS (System Control
Service) settings, operation display coordinates, and ROM
update information.
Initializes the IMH settings.
Initializes the Mcs settings.
Initializes all copier application settings.
Initializes the fax reset time, job login ID, all TX/RX settings,
local storage file numbers, and off-hook timer.
The following service settings:
• Bit switches
• Gamma settings (User & Service)
• Toner Limit
The following user settings:
• Tray Priority
• Menu Protect
• System Setting except for setting of Energy Saver
• I/F Setup (I/O Buffer and I/O Timeout)
• PCL Menu
Initializes the scanner defaults for the scanner and all the
scanner SP modes.
Deletes the network file application management files and
thumbnails, and initializes the job login ID.
All setting of Network Setup (User Menu)
(NCS: Network Control Service)
Initializes the job login ID, SmartDeviceMonitor for
Admin, job history, and local storage file numbers.
Initializes the DCS (Delivery Control Service) settings.