Ricoh D104 Field Service Manual page 456

Di-c1.5
Hide thumbs Also See for D104:
Table of Contents

Advertisement

5. System Maintenance
Delivery Server Maximum Entries
008
Sets the maximum number account entries of the delivery server user information managed
by UCS.
LDAP Search Timeout
010
Sets the length of the timeout for the search of the LDAP server.
020 WSD Maximum Entries
Addr Book Migration (SD => HDD)
040
Not used in this machine.
Fill Addr Acl Info.
5
This SP must be executed immediately after installation of an HDD unit in a basic machine
that previously had no HDD. The first time the machine is powered on with the new HDD
installed, the system automatically takes the address book from the NVRAM and writes it
onto the new HDD. However, the new address book on the HDD can be accessed only
by the system administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
Procedure
041
1. Turn the machine off.
2. Install a new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
5. However, at this point the address book can be accessed by only the system
administrator or key operator.
6. Enter the SP mode and do SP5846-041. After this SP executes successfully, any user
can access the address book.
454
[2000 to 50000 / 2000 / 1/step]
[1 to 255 / 60 / 1 /step]

Advertisement

Table of Contents
loading

This manual is also suitable for:

D106

Table of Contents