Ricoh D104 Field Service Manual page 55

Cause Code
-12002
-12003 Attempted registration without
-12004 Attempted setting with illegal entries
-12005 @Remote communication is
Operation Error,
Incorrect Setting
-12006 A confirmation request was made
-12007 The request number used at
-12008
Meaning
Inquiry, registration attempted
without acquiring Request No.
execution of a confirmation and no
previous registration.
for certification and ID2.
prohibited. The device has an
Embedded RC gate-related
problem.
after the confirmation had been
already completed.
registration was different from the
one used at confirmation.
Update certification failed because
mainframe was in use.
Copier Installation
Solution/ Workaround
Obtain a Request Number
before attempting the Inquiry or
Registration.
Perform Confirmation before
attempting the Registration.
Check ID2 of the mainframe.
Make sure that "Remote
Service" in User Tools is set to
"Do not prohibit".
Execute registration.
Check Request No.
Check the mainframe condition.
If the mainframe is in use, try
again later.
2
53