Ricoh D104 Field Service Manual page 343

Pattern Selection
0 None
1: Vertical Line (1dot)
2: Vertical Line (2dot)
3: Horizontal (1dot)
4: Horizontal (2dot)
003
5: Grid Vertical Line
6: Grid Horizontal Line
7: Grid pattern Small
8: Grid pattern Large
9: Argyle Pattern Small
10: Argyle Pattern Large
11. Independent Pattern (1dot)
005 Color Selection
006 Density: Bk
007 Density: C
008 Density: M
009 Density: Y
2111 [Line Pos. Ajust]
001 Execute: Mode a
002 Execute:Mode b
- [0 to 23 / 0 / 1/step]
12. Independent Pattern (2dot)
13. Independent Pattern (4dot)
14. Trimming Area
16: Hound's Tooth Check (Horizontal)
17: Band (Horizontal)
18: Band (Vertical)
19: Checker Flag Pattern
20: Grayscale Vertical Margin
21: Grayscale Horizontal Margin
23: Full Dot Pattern
Specifies the color for the test pattern.
- [1 to 4 / 1 / 1/step]
1: All colors, 2: Magenta, 3: Yellow, 4: Cyan
-
Specifies the color density for the test pattern.
-
[0 to 15 / 15 / 1 /step]
0: Lightest density
-
15: Darkest density
-
Executes the fine line position adjustment twice.
-
If this SP is not completed (NG is displayed), do
SP2111-003 first and then try this SP again.
Executes the fine line position adjustment once.
-
If this SP is not completed, do SP2111-003 first and
then try this SP again.
Main SP Tables-2
5
341