Ricoh D104 Field Service Manual page 840

3. Appendix: SP Mode Tables
014 Paper Transfer: 2nd: S4
017 Paper Transfer: 1st: S5
018 Paper Transfer: 2nd: S5
[Thick 1:L-Edge Correct] DFU
Thick 1 Paper: Leading Edge Correction
3
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2502 and SP2507 are multiplied by these SP values.
2521
Thick: 60 mm/sec
• The paper leading edge area can be adjusted with SP2522.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 1: Switch Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2522
paper leading edge between the erase margin area and the image area.
Thick: 60 mm/sec
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 1: T-Edge Correct] DFU
Thick 1 Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode. SP2502 and SP2507 are multiplied by these SP values.
2523
Thick: 60 mm/sec
• The paper trailing edge area can be adjusted with SP2524.
001 Paper Transfer: 1st
122
*ENG Not used
[1 to 50 / 6 / 1/step]
*ENG
150 mm > S5 size (Paper width)
*ENG Not used
*ENG [0 to 400 / 100 / 5%/step]
*ENG Not used
*ENG [0 to 30 / 0 / 2 mm/step]
*ENG Not used
*ENG [0 to 400 / 100 / 5%/step]