Ricoh D104 Field Service Manual page 969

006 Communication Test Call
007 Machine Information Notice
008 Alarm Notice
009 Non Genuin Tonner Alarm
010 Supply Automatic Ordering Call
011 Supply Manegement Report Call
012 Jam/Door Open Call
[Individual PM Part Alarm
Call]
5516
With @Remote in use, these SP codes can be set to issue an PM alarm call when one of SP
parts reaches its yield.
Disable/Enable Setting (0: Not send, 1:
001
Send)
004 Percent yield for triggering PM alert
5610 [Base Gamma Cntl P: Command]
Recall Factory Setting
004
Recalls the factory settings of the base gamma control points.
Restore Factory Setting
005
Overwrites the current values onto the factory settings of the base gamma control points.
Restore Prev. Setting
006
Recalls the previous settings of the base gamma control points.
5611 [Toner Color in 2C]
B-C
001
Adjusts the Cyan correction value of the blue signal in two-color mode.
[0 or 1 / 1 / - ]
0: Off
1: On
*CTL -
[0 or 1 / 1 / - ]
0: Not send, 1: Send
[1 to 255 / 75 / 1 %/step]
-
-
-
[0 to 128 / 100 / 1 /step]
*ENG
128: Darkest density
System SP5xxx
3
251