No Feed Paper Jam From Pfu - Ricoh D104 Field Service Manual

6. Troubleshooting
2. Replace the brackets for the vertical transport covers (Front: P/N D0392943, Rear: P/N
D0392944).
Jam 59: Fusing exit sensor does not turn off.
If Jam 59 occurs frequently, replace the fusing exit sensor bracket (D0394952) (
Sensor").
6

No Feed Paper Jam from PFU

Symptom:
A non-feed paper jam occurs when the machine tries to feed relatively heavy weight paper from the PFU.
Cause:
There is not enough pressure on the top sheet of paper stack to separate it from the other sheets.
Solution:
1. Instruct a customer to adjust the amount of paper stuck in the PFU when using heavy weight paper
types.
If the customer wants to use the heavy weight paper in the full load condition, try step 2.
682
p.274 "Fusing Exit