Ricoh D104 Field Service Manual page 819

[LD Power: Fixed] DFU
Adjusts the fixed LD power for each line speed and color.
2221
These SPs are activated only when SP3-041-002 is set to "0".
Normal: 120 mm/sec, Low: 60 mm/sec
001 Bk:Normal Spd
002 C:Normal Spd
003 M:Normal Spd
004 Y:Normal Spd
009 Bk:Low Spd
010 C:Low Spd
011 M:Low Spd
012 Y:Low Spd
[Dev. DC Bias:Fixed] DFU
Development DC Bias Adjustment
Adjusts the development bias.
Development bias is automatically adjusted during process control; therefore, adjusting these
2229
settings has no effect while Process Control (SP3-041-001 Default: ON) is activated.
After deactivating Process Control with SP3-041-001, the values in these SP modes are used
for printing.
Normal: 120 mm/sec, Low: 60 mm/sec
*ENG
*ENG
*ENG
[0 to 200 / 100 / 1%/step]
*ENG
Increasing this value makes the image
*ENG
density darker.
*ENG
*ENG
*ENG
System SP2xxx
3
101