Ricoh D104 Field Service Manual page 400

5. System Maintenance
005 Pixel Count AF Replacement
Coefficient
008
Adjusts the toner amount between near full and full. (0.1 indicates 10%.)
Alarm Setting
011
5 NOTE:
If the toner collection bottle has been replaced before the machine detects used toner near
full when this setting is set to "0", the machine cannot detect toner collection bottle near full.
In that case, set SP3-902-017 to "1".
Day Thresh:NF
Sets the threshold days for the near-full display. The near-full of the IT toner collection bottle
012
is displayed after the toner collection full sensor has detected the actuator in the ITB toner
collection bottle.
013 Total Collected Toner
014 Full Detection Date
[New Unit Detection]
3901
Turns new PCU detection on or off.
001 ON/OFF Setting
398
Not used
Displays the pixel counter after replacement of
*CTL
toner collection bottle.
[0 to 200000 / - / 1 cm
*ENG [0.1 to 1 / 1 / 0.1 /step]
Enables or disables the calling for @Remote.
[0 or 1 / 1 / - ]
*ENG
0: Enable @Remote calling
1: Disable @Remote calling
*ENG [1 to 30 / 10 / 1 day/step]
Displays the total amount from the near full
detection.
*ENG
[0 to 999999999 / 1 / 1]
Displays the date of the near full detection fot the
*ENG
ITB toner collection bottle.
[0 or 1 / 1 / - ]
*ENG
0: OFF, 1: ON
2
/step]