Move Exec - Ricoh D104 Field Service Manual

5. System Maintenance
4. Remove the inner cover (
5. Keep the SD card in the place [A] inside the inner cover after you have copied the application program
5
from one card to another card. This is done for the following reasons:
• 1) The SD card can be the only proof that the user is licensed to use the application program.
• 2) You may need to check the SD card and its data to solve a problem in the future.

Move Exec

The menu "Move Exec" (SP5-873-001) lets you copy application programs from the original SD card to
another SD card.
• Do not turn ON the write protect switch of an application SD card on the machine. If the write protect
switch is ON, a download error (e.g. Error Code 44) occurs during a firmware upgrade or application
merge.
1. Turn the main switch off.
2. Make sure that an SD card is in SD Card Slot 1. The application program is copied into this SD card.
3. Insert the SD card (having stored the application program) to SD Card Slot 2. The application program
is copied from this SD card.
4. Turn the main switch on.
5. Start the SP mode.
6. Select SP5-873-001 "Move Exec."
7. Follow the messages shown on the operation panel.
8. Turn the main switch off.
9. Remove the SD card from SD Card Slot 2.
10. Turn the main switch on.
548
p.172 "Inner Cover").