Ricoh D104 Field Service Manual page 1011

001 On Board NIC
002 On Board USB
5987 [Mech. Counter Protection]
001 0: OFF / 1: ON
[SP print mode]
5990
Prints out the SMC sheets.
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board NIC" is
limited only for the NRS or LDAP/NT authentication.
• Other network applications than NRS or LDAP/NT
authentication are not available when this SP is set to
"2". Even though you can change the initial settings of
those network applications, the settings do not work.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
This SP detects that a mechanical counter device is removed.
If it is detected, SC610 occurs.
System SP5xxx
3
293