Ardf - Ricoh D104 Field Service Manual

4. Replacement and Adjustment
Scanner leading edge and side-to-side registration
4
A: Leading Edge Registration
1. Put the test chart on the exposure glass. Then make a copy from one of the feed stations.
2. Check the leading edge and side-to-side registration. Adjust the following SP modes if necessary.
Standard: 0 ± 2 mm for the leading edge registration, 0 ± 2 mm for the side-to-side registration.
Leading Edge Registration
Side-to-Side Registration

ARDF

ARDF side-to-side, leading edge registration and trailing edge
156
SP mode
SP4-010-001
SP4-011-001