Ricoh D104 Field Service Manual page 445

050 1284 Compatibility (Centro)
052 ECP (Centro)
065 Job Spooling
066 Job Spooling Clear: Start Time
069 Job Spooling (Protocol)
090 TELNET (0: OFF 1: ON)
Enables or disables 1284 Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
• This SP is activated only when SP5-828-50 is set to
"1".
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
Treatment of the job when a spooled job exists at power
on.
0: ON (Data is cleared)
1: OFF (Automatically printed)
Validates or invalidates the job spooling function for each
protocol.
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: (Reserved)
Enables or disables the Telnet protocol.
[0 or 1 / 1 / – ]
0: Disable, 1: Enable
Main SP Tables-5
5
443