Ricoh D104 Field Service Manual page 769

Job High Temp.
008
Correction:Sp.
1112 [Image Process Temp. Correction]
These SPs are used for the fusing temperature control for variable job images. This control
saves the power comsumption when the machine copies or prints a job text image in black
and white mode.
Temp.:Normal:Center:Level1
(DFU)
Specifies the subtractive temperature level 1 of the fusing temperature control for variable
001
job images.
DFU
This SP is desgined for the factory use only. Do not change the adjusted setting.
Temp.:Normal:Center:Level2
Specifies the subtractive temperature level 2 of the fusing temperature control for variable
002
job images.
Usage Limitation:
Use 0°C or less for this setting.
[Envir. Correct:Fusing] DFU
-003 to
-006
These SPs are desgined for the factory use only. Do not change the adjusted setting.
Low Temp. Correction
003
Specifies the temperature correction in the low temperature condition.
High Temp. Correction
004
Specifies the temperature correction in the high temperature condition.
Offset Temp:Low
005
Specifies the temperature correction of the paper feeding taraget in the low temperature
condition.
Offset Temp:High
006
Specifies the temperature correction of the paper feeding taraget in the high temperature
condition.
*ENG [0 to 100 / 0 / 0.1 deg/step]
*ENG [-10 to 10 / 0 / 1 /step]
[-25 to 10 / NA: -10, EU/AA: -12 for C1.5a/
*ENG
NA: -3, EU/AA: -10 for C1.5c / 1 /step]
*ENG [0 to 15 / 5 / 1 deg/step]
*ENG [0 to 15 / 5 / 1 deg/step]
*ENG [0 to 15 / 6.5 / 0.1 deg/step]
*ENG [0 to 15 / 5 / 0.1 deg/step]
System SP1-xxx
3
51