Ricoh D104 Field Service Manual page 681

6. If Jam 11 still occurs, replace the brackets [A] [B] for the vertical transport covers (Front: P/N
D0392943, Rear: P/N D0392944).
Jam 12: Vertical transport sensor 2 does not detect paper from Tray 2.
1. Remove the lower guide bracket (
2. Press down on the vertical transport sensor bracket in the area around the emboss (bead) [A] as
shown above.
3. If there is a gap between this area of the bracket and the frame underneath it, replace the bracket
with P/N D0392929.
p.268 "Vertical Transport Sensor ")
Troubleshooting Guide
6
679