Ricoh D104 Field Service Manual page 865

[SP 5: SwTiming: L-Edge] DFU
2846
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer
[SP5: T-Edge Correct] DFU
Special 5 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
2847
mode. SP2833 and SP2837 are multiplied by these SP values.
• The paper trailing edge area can be adjusted with SP2848.
001 Paper Transfer
[SP 5: Sw Timing: T-Edge] DFU
2848
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
paper trailing edge between the erase margin area and the image area.
001 Paper Transfer
2849 [SP 5: Env. Correct Table] DFU
003 Paper Transfer:BW: 1st
005 Paper Transfer:FC: 1st
[SP3: Bias: BW]
2852
Adjusts the current for the paper transfer roller for special paper 3 in black-and-white mode.
Normal: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
*ENG [0 to 30 / 0 / 2 mm/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [-98 to 0 / 0 / 2 mm/step]
*ENG [1 to 50 / 17 / 1 /step]
*ENG [1 to 50 / 29 / 1 /step]
*ENG
[0 to 200 / 20 / 1 – A /step]
*ENG
*ENG [0 to 200 / 11 / 1 – A /step]
*ENG [0 to 200 / 13 / 1 – A /step]
System SP2xxx
3
147