Ricoh D104 Field Service Manual page 111

10. Attach the scanner left cover [A] to the mainframe (
11. Connect the USB cable [B] to USB-A (this is the USB slot closest to the front side of the machine) as
shown above.
• Make sure that the USB cable is inserted in USB-A (front side).
12. Attach the clamp [A] to the left middle area of the rear cover.
13. Wind the USB cable [B] two or three times not to interrupt the other slots, and then clamp the cable
loops ( x 1).
If PostScript 3 is already installed, go to step 23. If not, follow the steps from 14 to 22.
14. Remove the SD slot cover (
15. Insert the PDF direct card in SD slot 1.
16. Plug in and turn on the mainframe.
x 2).
x 1), and move the SD card from SD slot 1 to SD slot 2.
USB2.0/SD Slot Type G (D556)
2
109