Ricoh D104 Field Service Manual page 408

5. System Maintenance
005 Slave:K
006 Slave:C
007 Slave:M
008 Slave:Y
4550 [Scanner Appl.:Text/Chart]
4551 [Scanner Appl.: Text]
4552 [Scanner Appl.:Txt Dropout]
4553 [Scanner Appl.:Text/Photo]
5
4554 [Scanner Appl.: Photo]
4565 [Scanner Appl.: GrayScale]
4570 [Scan Appl.: Color: Text-Photo]
4571 [Scan Appl.: Color: Glossy Photo]
4572 [Scan Appl.: Color: AutoColor]
MTF: 0 (Off), 1-15 (Strong)
-005
Sets the MTF level (Modulation Transfer Function) designed to improve image contrast. Set
higher for stronger effect, lower for weaker effect.
Smoothing: 0 (x1), 1-7 (Strong)
-006
Use to remove "jaggies" if they appear. Set higher for smoother images.
Brightness: 1–255
-007
Set higher for darker, set lower for lighter.
Contrast: 1–255
-008
Set higher for more contrast, set lower for less contrast.
I-Dot Erase :0 (x1) 1-7 (Strong)
-009
Sets the erasure level of Irregular Dots. Set higher for stronger effect, lower for weaker effect.
0: Not activated
406
*ENG
*ENG
Reserved
*ENG
*ENG
[0 to 15 / 8 / 1 /step]
*ENG
0: MTF Off
*ENG [0 to 7 / 4 / 1 /step]
*ENG [1 to 255 / 128 / 1 /step]
*ENG [1 to 255 / 128 / 1 /step]
*ENG [0 to 7 / 0 / 1 /step]