Ricoh D104 Field Service Manual page 115

6. Attach the mechanical counter bracket [A] to the frame (
7. Connect the mechanical counter harness [C] to the mechanical counter [D] and the BCU (CN218)
[E], and route the harness as shown above (
8. Reassemble the machine.
9. Plug in the machine and turn on the main power switch.
10. Enter the SP mode.
11. Set SP5987-001 to "1: ON".
12. Exit the SP mode, and then turn the machine off and on.
x 2).
x 5)
Mechanical Counter (NA Only)
2
113