Ricoh D104 Field Service Manual page 847

[M-Thick:L-Edge Correct] DFU
Normal: 120mm/sec, Low: 60mm/sec
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
2721
mode. SP2703 and SP2707 are multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2722.
001 Paper Transfer:Normal:1st
002 Paper Transfer:Normal:2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[M-Thick:SwTiming:L-Edge] DFU
Normal: 120mm/sec, Low: 60mm/sec
2722
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer:Normal:1st
002 Paper Transfer:Normal:2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[M-Thick:T-Edge Correct] DFU
Normal: 120mm/sec, Low: 60mm/sec
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
2723
mode. SP2703 and SP2707 are multiplied by these SP values.
• The paper trailing edge area can be adjusted with SP2724.
*ENG
*ENG
[0 to 400 / 100 / 5 %/step]
*ENG
*ENG
*ENG
*ENG
[0 to 30 / 0 / 2 mm /step]
*ENG
*ENG
System SP2xxx
3
129