Ricoh D104 Field Service Manual page 427

[Authentication Error Code]
5481
These SP codes determine how the authentication failures are displayed.
001 System Log Disp
002 Panel Disp
5490 [MF Key Card (Japan only)]
001 Job Permit Setting
002 Count Mode Setting
5501 [PM Alarm]
001 PM Alarm Level
002 Original Count Alarm
5504 [Jam Alarm]
Determines whether an error code appears in the
system log after a user authentication failure
occurs.
*CTL
[0 to 1 / 0 / 1]
0: Off, 1: On
Determines whether an error code appears on
the operation panel after a user authentication
failure occurs.
*CTL
[0 to 1 / 1 / 1]
1: On, 0: Off
Sets up operation of the machine with a keycard.
[0 to 1 / 0 / 1]
0: Disabled. Cancels operation without a user
*CTL
code.
1: Enabled. Allows operation without a user
code.
*CTL -
[0 to 9999 / 0 / 1 / step]
0: Alarm off
*CTL
1 to 9999: Alarm goes off when Value (1 to
9999) x 1000 > PM counter
[0 or 1 / 1 / -]
0: No alarm sounds
*CTL
1: Alarm sounds after the number of originals
passing through the ARDF > 10,000
*CTL -
Main SP Tables-5
5
425