Image Transfer; Itb Cleaning Unit - Ricoh D104 Field Service Manual

Image Transfer

ITB Cleaning Unit

If you replace the cleaning unit or toner collection bottle after the machine detects that it is full or near-full,
the machine automatically resets the PM counter for the bottle after replacement.
But, if you replace a bottle that is not full or near-full, then you must reset the PM counter for this unit. To do
this, set SPs 3902-017 and -020 to 1 before you turn off the power switch.
If you do this, then the machine will reset the PM counter for the units automatically, after you turn the power
on again.
SP 3902-017 is for the ITB cleaning unit and SP 3902-020 is for the ITB toner collection bottle.
1. Open the ITB cleaning unit cover [A] (
2. ITB cleaning unit [A] (
x 2).
x 2)
Image Transfer
4
215