Ricoh D104 Field Service Manual page 65

• Use the screw holes [A] and [C] if the mainframe is directly installed on the caster table.
• Use the screw holes [B] and [C] if the one-tray paper feed unit (D425) is installed on the caster
table.
3. Grasp the handle [A] and grips [B] of the machine, if the copier is to be installed on the caster table.
• Hold the handle and grips of the machine when you lift and move the machine.
4. Lift the copier or one-tray paper feed unit [C], and then install it on the caster table [D].
5. Pull out tray 2 of the mainframe or the tray of the one-tray paper feed unit.
6. Secure the machine or one-tray paper feed unit to the caster table (step screw x 2)
Caster Table (D488)
2
63