Ricoh D104 Field Service Manual page 420

5. System Maintenance
014 Tray 4: 2
015 Tray 4: 3
016 Tray 4: 4
[RK 4 Disconnect Operation]
Enables or disables the prevention for RK4 (accounting device) disconnection.
5186
If the RK4 is disconnected for 10 seconds when this SP is set to "1 (Enable)", the machine
automatically jams a sheet of paper and stops.
5
001 -
[Copy NV Version]
5188
Displays the version number of the NVRAM on the controller board.
001 -
5196 [90 degree rotation (copy)]
001 -
5212 [Page Numbering]
This program adjusts the position of the second side page numbers.
A "– value" moves the page number positions to the left edge.
A "+ value" moves the page number positions to the right edge.
003 Duplex Printout Right/Left Position
004 Duplex Printout High/Low Position
418
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
*ENG
0: A3, 1: DLT
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
*ENG
0: B4, 1: LG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
*ENG
0: B5 LEF, 1: Exe LEF
[0 or 1 / 0 / 1/step]
*ENG 0: Disable
1: Enable
*CTL -
Not used
*CTL
[–10 to 10 / 0 / 1 mm/step]