Ricoh D104 Field Service Manual page 291

3. By-pass paper size sensor [A] (
When reinstalling the by-pass paper size sensor
1. Adjust the projection [A] of the left side fence bar (it must be centered).
2. Install the by-pass paper size detection switch so that the hole [B] in this switch faces the projection
[C] of the left side fence bar.
3. Reassemble the copier.
4. Plug in and turn on the main power switch.
5. Check this switch operation with SP5803-046 (By-Pass Size Detection SW < Input Check).
- Display on the LCD -
Paper Size
A3 SEF
B4 SEF
x 1)
Display
00001001
00001011
Paper Size
A5 SEF 00001110
B6 SEF 00001100
Duplex Unit
4
Display
289