[SP 3: T-Edge Correct] DFU
Special 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2852 and SP2857 are multiplied by these SP values.
2873
Normal: 120mm/sec, Low: 60mm/sec
• The paper trailing edge area can be adjusted with SP2874.
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP 3: Sw Timing: T-Edge] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2874
paper trailing edge between the erase margin area and the image area.
Normal: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP 3: Env. Correct Table] DFU
2880
Normal: 120mm/sec, Low: 60mm/sec
003 Paper Transfer:BW:Normal:1st
004 Paper Transfer:BW:Normal:1st
005 Paper Transfer:FC:Normal:1st
006 Paper Transfer:FC:Normal:2nd
009 Paper Transfer:BW:Low:1st
010 Paper Transfer:BW:Low:2nd
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[-98 to 0 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[1 to 50 / 23 / 1 /step]
*ENG
[1 to 50 / 26 / 1 /step]
*ENG
[1 to 50 / 38 / 1 /step]
*ENG
[1 to 50 / 33 / 1 /step]
*ENG
[1 to 50 / 32 / 1 /step]
*ENG
[1 to 50 / 21 / 1 /step]
System SP2xxx
3
149