2. Installation
Cause
2
Error Caused by
Response from
GW URL
Moving the Machine
This section shows you how to manually move the machine from one floor to another floor. See the section
"Transporting the Machine" if you have to pack the machine and move it a longer distance.
• Remove all trays from the optional paper feed unit.
Transporting the Machine
Main Frame
1. Do SP 4806-001 to move the scanner carriage from the home position. This prevents dust from falling
into the machine during transportation.
2. Make sure there is no paper left in the paper trays. Then fix down the bottom plates with a sheet of
paper and tape.
3. Do one of the following:
54
Code
Meaning
-2385 Other error
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
Two registrations for the same
-2391
mainframe
-2392 Parameter error
-2393 External RCG not managed
-2394 Mainframe not managed
-2395 Box ID for external RCG is illegal.
Mainframe ID for external RCG is
-2396
illegal.
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Solution/ Workaround
Check the registration condition
of the mainframe
Check the ID2 of the mainframe.
Check the Request No.