Ricoh D104 Field Service Manual page 958

3. Appendix: SP Mode Tables
[Access Control]
5401
When installing the SDK application, SAS (VAS) adjusts the following settings. DFU
3
103 Default Document ACL
Authentication Time
104
Specifies the timeout of the authentication.
162 Extend Certification Detail
200 SDK1 Unique ID
201 SDK1 Certification Method
210 SDK2 Unique ID
211 SDK2 Certification Method
220 SDK3 Unique ID
221 SDK3 Certification Method
240
Whenever a new login user is added to the
address book in external certification mode (for
Windows, LDAP, RDH), the default document
ACL is updated according to this SP setting.
[0 to 3 / 0 / 1]
0: View
*CTL
1: Edit
2: Edit/Delete
3: Full control
Note: This SP setting is ignored on a machine that
is not using document server.
[0 to 255 / 0 / 1 sec./step]
*CTL 0: 60 seconds
1 to 250 seconds
Selects the log out type for the extend
authentication device.
Bit 0: Log-out without an IC card
*CTL
0: Not allowed (default)
1: Allowed
*CTL
*CTL
"SDK" is the "Software Development Kit". This
*CTL
data can be converted from SAS (VAS) when
*CTL
installed or uninstalled. (DFU)
*CTL
*CTL