Ricoh D104 Field Service Manual page 845

[Thick 3: L-Edge Correct] DFU
Thick 3 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2651 and SP2652 are multiplied by these SP values.
2654
Thick: 60 mm/sec
• The paper leading edge area can be adjusted with SP2655.
001 Paper Transfer: 1st
003 Paper Transfer: 2nd
[Thick 3: Switch Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2655
paper leading edge between the erase margin area and the image area.
Thick: 60 mm/sec
001 Paper Transfer: 1st
003 Paper Transfer: 2nd
[Thick 3: T-Edge Correct] DFU
Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2651 and SP2652 are multiplied by these SP values.
2656
Thick: 60 mm/sec
• The paper trailing edge area can be adjusted with SP2657.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 3: TrailingEdge Correction] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2657
paper trailing edge between the erase margin area and the image area.
Thick: 60 mm/sec
*ENG [0 to 400 / 100 / 5%/step]
*ENG Not used
*ENG [0 to 30 / 0 / 2 mm/step]
*ENG Not used
*ENG [0 to 400 / 100 / 5%/step]
*ENG Not used
System SP2xxx
3
127